Tree of Savior Forum

Priest C3 + Druid C3 build questions

Class and Rank Cleric
#1

Hi everyone!
Going straight to the point…
I’m planning on resetting my chap-kriv-pd into a priest3-druid3 when the rank reset comes. I want to be a damage mitigating support w/ healing and reviving capabilities + soloable.

My queries are:

  • Can you AA while in Transform, using off-hand dagger? and will it have the damage lines you have such as Sacra and Cafri?
  • will having mid SPR give me trouble in using Lycantrophy?
  • will blessing work on Lycantrophys attacks/skills?
  • and is using controller not prefferable in playing Druid?

I know some of t hese might/ve been answered already. I searched and searched but most answers are outdated.
Any answers are appreciated.

Thank you in advance <3

#2

Do you hate your Chap-Kriv-PD? What was your skill build and stats. I’m going for one with my reset. Experiences please :nerd:

No, transform and lync attacks are their own skills.

Theres 2 sides to having more SPR if you are focusing on skills that take % sp when used. 1st is the good side, you have a larger sp pool to cast other skills while using the % draining sp skill. 2nd the bad side, due to the % sp draining at a % value, the larger your SP pool the larger the pots or longer the time you would need to rest to refill it back up (top it off).

This I am not completely sure on, but I don’t see why not. Blessing procs on all skills and AAs.

I use a controller for every class including archer. As for the hotkeys bar that changes when you transform I am unsure. SOMEONE ANSWER THIS FOR HIM PLEASE.

1 Like
#3

Thank you very much for your reply!
As to answer your question, I don’t particularly hate it. But not having Cleric C2 makes it difficult for me + the changes on Krivis’ Zalciai added salt to the wound.

To be honest, this build is pretty powerful solo below 220 (because i’m only at 228 & im Full SPR), but I feel that on the upper levels, not having Cleric C2 will bite my ass.

Again, thanks!

#4

What were the skill points you used?

#5

Here’s my current skill build:
https://tos.neet.tv/skill-planner#41222c3e.15223444.11213f435164759aa5.12233545.152535.1325354161

1 Like
#6

Hello, I am a Cler2 -> Priest3 -> Druid3 user. ( Pure INT ), so I think I can answer your queries regarding the class path.

  • I just want to clarify that you can actually use off-hand dagger attacks ( C key ) while in transform mode ( a small text will appear on top of the werewolf’s/transformed mob’s head [ Dagger Pierce ] before the damage line appears ). Having buffs like Sacra, Cafrisun, Enchant Fire will also bring additional damage lines. :3

  • SPR sucks for Druid3 so don’t bother, you will do well with SP Pots. Having too much SPR will be complete shiet for Lycanthropy because you can’t fight the SP drain with normal SP Pots.

  • Blessing works wonders but because Lycan’s bonus outshadows Blessing’s bonus, it won’t be that noticeable.

  • I think I might have seen people complaining about playing Druid on controllers because of the hotkey problems of the werewolf’s skills.

BTW, if you have any other questions about Druids, I suggest that you visit the Druid Thread here in the forums, lots of Druid users such as myself can help you with the build.

1 Like
#7

Ohh thanks for the infos man!

Just a few more queries:

  • without having SPR, is your Stoneskin still efficient/useful in the 300+ content?
    IF not, do you think omitting Priest C3 will greatly affect the build? (because we have Safety walls and stera throfh anyway right?)

  • How about taking Cleric C3 instead of Priest C3?

  • And may I ask for the cons you experienced with the build?

  • For the controller, that will suck for me then… I hope someone can clarify this because I love playing ToS with controller </3

Thank you kind sir!

#8

Actually, once I get my Skill Reset Potion, I am planning to remove Stone Skin from the build because I am aiming to be a nuker instead ( Heal does crazy damage with the x2 damage from Blessing ).

Stone Skin on 290 dungeon blocks attacks 25% of the time so I don’t think it will do well on higher-tier mobs if you don’t have SPR. Good luck with magic mobs lmao.

Priest3->Druid3 will only be good on ET, I think.

People don’t really take Cleric 3 that much because the last class circle is an overkill, C2 Heal is enough. Divine Might is already okay at level 5, Safety Zone has a +20 block count attribute so no point on going to Cleric3. Guardian Saint sucks, as most people say.

The only con that I noticed for my Cle2-Pr3-Druid3 path is that I don’t have much offensive skills other than: Heal, Cure, Carnivory, & transform skills. Skill rotations are around 20 seconds.

I think they experienced difficulties on using controllers, because once you use Transform, 1-5 slots will be overwritten, which you can’t reassign to another spot.

2 Likes
#9

Oh I see I see…
If i’m not going SPR heavy, then I don’t think Priest C3 will be that usefull then.

I was thinking of getting Cleric c3 - Priest C2 - Druid C3 now, mainly because:

  • More HEALS
  • with High INT, Cure lvl 15 gets amplified more so more DPS(?) (I think and hope)
  • with Guardian Saint’s new attribute, it can be used now as a good support skill (again, I think and hope)

I got a few last questions for you Wooshin:

  • with your skill rotation and skill CDs, how long is the dead time?

Again, thanks alot man!

#10

Probably 10-15 seconds.

#11

Guardian saints new attribute?

#12

I’m not sure which one is it, but I think it’s GS: Decreased Damage (-50% Damage Reduction at Level 10). Or was it GS: Change Target?

There’s hardly 5% Cleric C3 users so – *shrugs*

#13

The new one is the GS: Change Target. If I’m not mistaken, it will act like “Devotion”(I assume everyone here knows RO), to the buffed person.